Plywood Lay-up Line R7Download brochure
Plywood Lay-up Line R7 - optimized for high-quality plywood
The fully automated Plywood Lay-up Line R7 follows the operator-set recipe and automatically feeds the sheets in the correct order for lay-up. It utilizes intelligent analyzers to optimize sheet alignment and veneer pairing allows feeding up to three sheets at once for maximum capacity.
Raute one-sided liquid extruder (LEG) and curtain coating (CC) gluing methods in the line as well as gripper veneer feeding options are gentle and don’t break thinner sheets. One-sided gluing saves up to 25% in glue consumption compared to traditional roller gluing. Vacuum box feeding is available for cross grain sheets.
The use of paired ply numbers in one-sided gluing enables using thicker sheets inside the structure, bringing savings in glue consumption through a reduced gluing need. An optional camera analysis for gluing control further optimizes chemical use. MillSIGHTS data capturing and reporting system analyzes production capacity and operation for you, suggesting optimal settings for maximum productivity.
The first one-sided R7-Series lay-up lines were delivered over 20 years ago. Most of the world's one-sided lay-up lines have been delivered by Raute. Utilize our expertise also for designing a tailored lay-up line for your specific needs!
Maximize lay-up capacity with R7-Series plywood lay-up lines
To learn more about how you can maximize lay-up capacity with the R7 plywood lay-up line, talk to our expertsContact us
Don’t be one step ahead. Be two steps ahead.
Take a look into the future of veneer, plywood, and LVL production.Explore future mill
Capacity up to 15 000 veneer sheets per 8h work shift
Only one operator needed
Save up to 25% in glue consumption
Fully automatic lay-up line operation for maximum productivity
|Operators on the Line||1||1|
|Automatic Veneer Grading|
|Automatic Veneer Aligning|
|Installed power (kW)||380||185|
|Tailored Plywood Size Available|
|Changeable Gluing method|
|Glue spread (g/m2) min.||120|
|Automatic Bottom plate feeding|
|Plywood sizes||8x4, 8x8||4x8, 5x10|
|Capacity up to (sheets/8h)||15000||11000|
Plywood Lay-up Line R7 machines
Veneer Visual and Moisture Analyzer R5 - Lay-up
Analyzer with a high-accuracy camera system and industrial light system, ensuring correct visual quality and moisture for hot pressing, minimizing the risk of delamination and rejected end products.