ZAO Murom
Green veneer moisture sorting boosts dry veneer production and quality.
Stand-alone green veneer moisture analyzer to separate veneer sheets according to moisture in different moisture grades.
{{ caption }}
{{# prev }} {{/ prev }} {{# next }} {{/ next }}Veneer Moisture Analyzer R5 - Peeling (formerly known as GMA) is used to separate veneer sheets according to moisture in different moisture grades. With this analyzer, hardwood veneers are typically sorted into two moisture grades and softwood veneers into three moisture grades.
Veneer Moisture Analyzer R5 - Peeling can increase drying capacity and raw material recovery and decreasing energy consumption. When drying parameters are set accurately based on the actual Initial Moisture Content of veneer sheets, less time and energy are needed. At the same time, dry veneer quality is increased and overdrying is minimized.
Depending on the line width and wanted coverage, it can be equipped with up to five pieces of moisture measuring sensors. The system comes with a control cabinet including analyzer PC and touch screen user interface for easy parameter setting. You can install the analyzer on the peeling line of any brand.
If you have any questions or would like to discuss our solutions in more detail, you can always contact our experts.
Contact our expertsKey benefits
Maximize veneer quality
Improve drying capacity
Minimize over drying
Easy and fast installation and start-up