Veneer Moisture Analyzer R3 - Drying
Accurate moisture sorting for dryers without grading line
Veneer Moisture Analyzer R3 (formerly known as Mecano DMA-CT) provides accurate analysis based on the traditional contact brush measuring. With the R3 analyzer, you can detect the high moisture veneers and avoid passing them directly to lay-up. Based on the analyzer measurements, it´s also possible to optimize the dryer speed to avoid over-drying and improve dryer productivity and veneer quality.
Veneer Moisture Analyzer R3 is equipped with easy to use touch screen user interface for setting up moisture recipes. The analyzer is normally installed directly after the dryer before the manual stacking. It can be equipped with ink marking to mark the wet veneer sheets. The Veneer Moisture Analyzer R3 is available for different dryer widths.
Improve drying capacity
Minimize over drying
Improve veneer quality