Veneer Strength Analyzer R7 - Drying
Utilize strength grading to use the raw material efficiently
Veneer Strength Analyzer R7 (formerly known as Metriguard 2865 DME) provides industry-standard strength veneer grading to produce consistent quality panels and LVL and predictable end-products. A strength analyzer allows you to sort veneer into different strength and density grades. This way the sheets can be used efficiently for correct layers to produce stronger end products.
Veneer Strength Analyzer R7 utilizes different measurement technologies for strength analysis. It measures the density, moisture, and thickness of the veneer sheets as well as sonic velocity through the veneer. Analysis based on these measurements enables the grading of veneers based on the moisture, density, ultrasonic propagation time (UPT), or Modulus of Elasticity (MoE).
Want to know more?
If you have any questions or would like to discuss our solutions in more detail, you can always contact our experts.Contact our experts
Optimize LVL and plywood structures
Produce high-quality structural plywood
More efficient use of raw material
|Veneer thickness (mm)||0.5 – 4.2||0.5 – 4.2|
|Available sizes (ft)||5 - 10||5 - 10|
|Moisture Range (mc)||1% - 30%|
|Moisture Accuracy (mc)||±2.5%|
|Moisture and density sensors (pcs)||6 - 10|
|Thickness Accuracy (mm)||±0.5||±0.5|
|Density range (kg/m³)||300-1500|
|Density accuracy (kg/m³)||±10%|
|Sonic Wheels (pcs)||2-3||2-3|
|Sonic Accuracy (mm/s)||±3%||±3%|
|Modulus of Elasticity (E)||±15%|