Face Veneer Composing Line R7
Maximize face veneer recovery with the most advanced technology on the market, that meets even the most demanding needs for composed face veneer quality.
High-quality composed face veneer with invisible joints
Raute Face Veneer Composing Line R7 meets even the most demanding needs for composed face veneer quality in various applications. Our joints are also approved for use in LNG plywood. Accurate defect detection notices even minor rots inside wood, allowing you to remove defects with a maximum amount of quality veneer remaining after clipping.
Raute gluing system creates invisible butt joints between veneer pieces with no glue gushing through the joint. The glue joints are even stronger than the wood itself, enabling sheets to be further processed in fully automated lay-up lines.
This fully automated line is the only one-operator line on the market. It enables flexible production of face veneer and plywood in special sizes.
Maximize the recovery of smooth and strong face veneer with R7-Series composers
To learn more about how you can maximize your recovery with the R7 face veneer composing line, talk to our expertsContact our experts
Don’t be one step ahead. Be two steps ahead.
Take a look into the future of veneer, plywood, and LVL production.Explore future mill
Only one operator needed
Maximized face veneer recovery through accurate defect detection and clipping
The strongest and invisible face grade joints in the world
Up to 20% face veneer recovery compared to other technologies
|Veneer thickness (mm)||1,2 - 3,6||1,2 - 3,6|
|Operators on the Line||1||1|
|Installed power (kW)||120||125|
|Line Speed up to (m/min)||45||45|
|Capacity, (length meter/h)||300||300|
|Veneer Visual Analyzer R7 – Composing|
|Minimum random width (mm)||200||200|
|Composed sheet width (mm)||1000 - 4500||1000 - 4500|